Shock Test system mainly used for accurate measurement and evaluation and the impact resistance of product packaging. It has an efficient platform damping device; for large-scale impact test benches, the instantaneous impact force during impact is very large, and the efficient platform damping device is greatly reduced In addition to the impact on the ground, no special foundation is needed, and the installation is very convenient.

High acceleration generating device can be configured. For small specimens, high acceleration shock test is required. The high acceleration generating device can be fixed on the surface of the impact test bench. According to the principle of energy transfer, higher impact acceleration can be obtained than IS type impact bench , For the test piece smaller than 200x200, the impact test index is: the peak acceleration of the impact can reach 5000-50000m/s2, and the acceleration duration is 0.2ms~1ms. Immediately understand the impact resistance and use of the product according to the results of the impact test. surroundings. It can realize half sine wave impact test, back peak saw-tooth wave, trapezoidal wave and so on. Simulate the shock conditions that the restored product may suffer to help analyze and improve the product structure. We can provide the most advanced impact system to meet any of your mechanical impact requirements.

Features

1- Low pressure cylinder: Low pressure cylinders are used for the reaction force and braking power, which are safe and reliable, and easy to maintain.

2- Two cylinder brake mechanisms work at the same time to ensure reliable locking.
3-Cylinder or segmented spring drive: adopts cylinder or segmented spring drive, the impact overload value is controlled by adjusting the air pressure

4-Digital control: fast and convenient digital control of impact height, good impact repeatability.

5-Special conformance table: high-performance composite table, built-in waveform amplifier, easy to use, stable performance

Model		IS5	IS10	IS25	IS50	IS100	IS200	IS300
Maximum test load (kg)		5	10	25	50	100	200	300

Table size (mm*mm)		120*120	200*200	350*350	500*500	700*700	750*750	800*800

Shock waveform (m/s²)	Half sine waveform	100~30000	100~20000	100~10000	100~6500	150~6000	150~5000	150~3500
	After peak saw-tooth	100~1000	100~1000	100~1000	100~1000	100~1000	150~1000	150~1000
	Trapezoidal wave	150~1500	150~1500	150~1200	150~1200	150~1200	150~1000	100~1000
Pulse duration time (m/s)	Half sine waveform	0.5~20	0.6~20	0.8~20	1.5~20	2~20	2.5~20	3~20
	After peak saw-tooth	6~18	6~18	6~18	6~18	6~18	6~18	6~18
	Trapezoidal wave	6~20	6~20	6~20	6~25	6~25	6~25	6~25
Maximum impact distance (mm)		1550	1500					1400
Anti-secondary impact device		Air pressure friction brake			Hydraulic friction brake
Table weight (kg)		1300	1500	2800	3800	4350	4900	6250

Dimensions (LWH)(mm)		9004502600	10005002700	11008002800	11007502800	13508502850	14209202900	148010002950
Control and measurement system		OKS01
Power requirements		220V±10% single phase AC 50Hz 2kVA
Hydraulic pump station power requirements		380V±10% 3 phases AC 50Hz
Hydraulic pump station power consumption (kVA)		2.5	2.5	4	4.6	4.6	6.2	6.5
Applicable standard		GB/T2433.5,GB/T2423.6,IEC68-2-29,JJG497-200