The Shock Test Machine is a high-acceleration Shock Test Machine specially developed to meet the requirements of the military industry and home appliances. It adopts the drop principle. In order to increase the initial velocity, the air pressure reverse thrust or spring energy storage is adopted. By adjusting the inflation pressure, it is convenient to achieve various accelerations. For high accelerations that are difficult to achieve, the machine is equipped with a waveform amplifier.

Automatic hydraulic hoist type; used to simulate the actual shock in the real world, measure and identify product fragility levels and evaluate protective packaging for structure optimization and improvement. Support half-sine wave, terminal-peak sawtooth wave and square wave shock tests.

Features

1.Two or more guidance shafts, hydraulic hoist type. Lifting with high balance and little noise.
2. Optimized smithing or foundry table made of magnesium alloy is of high rigidity and noiseless at high frequency
3. Inner brake system generates great skid force and guarantees anti-second shock.
4.Digital controller for hoist height, with perfect repeatability.
5.Buffer base effectively reduces the shock effect for the house floor, there is no need to build special base. It's quite convenient for the installation.

Model		IS5	IS10	IS25	IS50	IS100	IS200	IS300
Maximum test load (kg)		5	10	25	50	100	200	300

Table size (mm*mm)		120*120	200*200	350*350	500*500	700*700	750*750	800*800

Shock waveform (m/s²)	Half sine waveform	100~30000	100~20000	100~10000	100~6500	150~6000	150~5000	150~3500
	After peak saw-tooth	100~1000	100~1000	100~1000	100~1000	100~1000	150~1000	150~1000
	Trapezoidal wave	150~1500	150~1500	150~1200	150~1200	150~1200	150~1000	100~1000
Pulse duration time (m/s)	Half sine waveform	0.5~20	0.6~20	0.8~20	1.5~20	2~20	2.5~20	3~20
	After peak saw-tooth	6~18	6~18	6~18	6~18	6~18	6~18	6~18
	Trapezoidal wave	6~20	6~20	6~20	6~25	6~25	6~25	6~25
Maximum impact distance (mm)		1550	1500					1400
Anti-secondary impact device		Air pressure friction brake			Hydraulic friction brake
Table weight (kg)		1300	1500	2800	3800	4350	4900	6250

Dimensions (LWH)(mm)		9004502600	10005002700	11008002800	11007502800	13508502850	14209202900	148010002950
Control and measurement system		OKS01
Power requirements		220V±10% single phase AC 50Hz 2kVA
Hydraulic pump station power requirements		380V±10% 3 phases AC 50Hz
Hydraulic pump station power consumption (kVA)		2.5	2.5	4	4.6	4.6	6.2	6.5
Applicable standard		GB/T2433.5,GB/T2423.6,IEC68-2-29,JJG497-200