AC 380V 50Hz / 60Hz Battery Agree Chamber For Temperature Humidity Vibration Testing

Test Specification

Description

IEC 62660-2

Reliability & Abuse Testing for Lithium Ion Cells in Electric Vehicles

• Capacity discharge test at -20°C, 0°C, 25°C and 45°C

• High temperature endurance

This test is performed to characterize cell responses to high-temperature

environment. Raise temp at rate of 5°C/min to 130°C +/-2°C. Soak for 30 min

• Temperature cycling

This test is performed to characterize thermal durability of cell by exposing at low and high temperature environment alternately to cause expansion and contraction of cell components. Start and end below test at 25°C.

• Test without electrical operation. Cycles between minimum temperature of

-40°C (or specified by mfg) and max of +85°C (or specified by mfg). Repeat for 30 cycles. Refer to spec for timed ramps.

• Test with electrical operation. Cycles between minimum temperature of

-20°C and max of +65°C. Repeat for 30 cycles. Refer to spec for timed ramps.

SAE J2464

EV & HEV Rechargeable Energy Storage System Safety & Abuse Testing

•Thermal Stability. Increasing temperature in 5°C increments.

•Temperature Cycling. Cycle between 70°C to -40°C. (soak cells for 1 hr and modules & packs for 6 hours).

Repeat for a total of 5 cycles

IEC 60086-4

Primary Batteries, Part 4: Safety of Lithium Batteries

• Altitude Simulation Test

Store at pressure of 11.6 kPA or less for a minimum of 6 hrs at ambient.

• Thermal Cycling

Store for a minimum of 6 hours at 75°C and -40°C with transition time of

≤30 minutes in between for 10 cycles. Store a minimum of 24 hours at ambient.

• External Short Circuit

Product temperature to stabilize at 55°C.

• Thermal Abuse

Raise temperature 5°C/min. to 130°C and soak for 10 minutes.

UL 1642

Standard for Lithium Batteries

• Short circuit test at 20°C & 55°C

• Heating test from 20°C to 130°C at 5°C/min and soak for 10 minutes. Return to 20°C.

• Temperature Cycling test with a max of 30 minute transitions

• 70°C and soak for 4 hours

• 20°C and soak for 2 hours

• -40°C and soak for 4 hours. Returnto 20°C. Repeat for total of 10 cycles. Store for a minimum of 24 hours at 20°C

• Altitude Simulation Test

• Store for 6 hours at 11.6kpa (50,000) and a temperature of 20°C

UN Lithium Battery Testing

UN Lithium Battery Testing Requirements

• Altitude Simulation Test

Store at 11.6kpa (50,000) and a temperature of 20°C for a minimum of 6 hours.

• Temperature Cycling Test

Store at 75°C and -40°C for a minimum of 6 hours for small cells & batteries or a minimum of 12 hours for large cells & batteries with 30 minutes transitions.

Repeat for a total of 10 cycles. Store for 24 hours at 20°C.

IEC 61960

Secondary lithium cells and batteries for portable applications

Discharge performance test at 20°C and -20°C

Test Specification

Description

IEC 62133

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

• Altitude Simulation Test

Store at 11.6kpa (50,000) and a temperature of 20°C for 6 hours.

• Temperature cycling

Test at 75°C and soak for 4 hours, 20°C at for a minimum of 2 hours,

-20°C at 4 hours, then return to 20°C and soak for a minimum of 2 hours (≤30 minute transitions).

Repeat for total of 5 cycles.

• Thermal Abuse

Heat from 20°C to 130°C at a rate of 5°C/min and soak for 10 minutes.

UL 2054

Household and Commercial Batteries

• Heating test from 20°C to 130°C at 5°C/min and soak for 10 minutes. Return to 20°C.

• Temp Cycling test with a max of 30 minute transitions

• 70°C and soak for 4 hours

• 20°C and soak for 2 hours

• -40°C and soak for 4 hours. Return to 20°C. Repeat for total of 10 cycles. Store for a minimum of 24 hours at 20°C

IEEE 1625

Laptop Rechargeable Batteries

• Altitude Simulation Test

Store at 11.6kpa (50,000) and a temperature of 20°C

• Heating Test

130°C for 10 minutes

• Temperature Cycling Test

Store at 75°C and -40°C for a minimum of 4 hours. Repeat for a total of 5 cycles.

IEEE 1725

Phone Rechargeable Batteries

• Heating Test

130°C for 60 minutes

• Temperature Stability

150°C for 10 minutes